Reasons Your Hot Water Heater Isn't Working
Reasons Your Hot Water Heater Isn't Working
Blog Article
The content which follows on the subject of Hot Water Heater Repair is unquestionably enlightening. Don't skip it.
Numerous contemporary houses take advantage of an electric water heater for their heating system, due to its ease and also convenience of use. However, just like any other electrical appliances, issues may occur with its usage, suddenly. It can be truly discouraging to awaken to a cool shower rather than a warm one or having your bathroom with water that isn't warm sufficient and even as well warm. Whatever the situation may be, water heater issues can be fairly nerve-racking. Thankfully, we have actually made a checklist of possible services to your water heater concerns. There are a variety of factors that could cause many of these problems, maybe a concern with the power supply, the electric burner, or the thermostat. Before doing anything, ensure you switch off the primary power supply for security. Whatever the issue is, getting it repaired ought to not pose too much of a concern if you adhere to these actions:
Inspect Your Power Supply:
As basic as this may appear, it is extremely needed. Without sufficient power, your water heater will certainly not operate. So the first thing to do when your water unexpectedly stops working is to confirm that it isn't a power trouble. Examine if the fuse is burnt out or the circuit breaker tripped. If the breaker is the problem, simply turn it on and off once again. Change any kind of broken or damaged fuse. Evaluate the appliance with power after these adjustments to see if it's now functioning.
Inspect the Heating Element in the Hot Water Heater:
If it's not a power problem, after that try looking into your heating element if it is still functioning. Check each of your heating elements to ensure the problem isn't with any one of them. If any of them is damaged, replace that component and then examine whether the hot water is back on.
Examine Your Thermostat:
If your water heater still isn't functioning or the water coming out isn't warm enough, you might need to inspect the temperature settings on your top thermostat. Guarantee the breaker is switched off prior to doing anything. Open the accessibility panel and press the red switch for temperature level reset above the thermostat. This need to help warm the water. Turn the circuit breaker back on and also check if the trouble has been resolved.
Call An Expert:
If after changing all defective components and resetting your temperature, the hot water heater still isn't working, you might require to get in touch with a specialist plumber for a specialist point of view. The issue with your heating unit could be that the cold and hot taps have been changed or it may be undersized for the quantity of hot water needed in your house. Whatever the situation might be, an expert plumber would assist solve the issue.
Conclusion
Hot water heater problems are not constantly major. Much of them are due to minor concerns like a blown fuse or worn-out burner. Replacing the damaged parts must do the trick. Nevertheless, if you are still unable to fix the problem, give a call to your closest plumber ahead to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As an avid person who reads on No Hot Water — Water Heater Repair, I assumed sharing that excerpt was really useful. Enjoyed our posting? Please share it. Let another person discover it. I love reading our article about How to Troubleshoot and Repair an Electric Water Heater.
Schedule A Service Call
Report this page